• 驱动类型:

  无电机

• 种类:

  外啮合齿轮

• 其他特性:

  用于矿物油, 高压

• 压力:

  最多: 100 bar (1,450.377 psi)

  最少: 0 bar (0 psi)

KP series high pressure gear pumps are mainly used in oil-hydraulic plants. They are suitable both for hydraulic fluids as well as mineral oil bases (DIN 51524/25) and engine oils (DIN 51511). The housing components are made from high-grade cast iron, the shaft and gears from hardened and
ground case-hardening steel. The shafts are supported in multi-layer bearings that have excellent antifriction properties. The seals in the drive shaft ends are made using solely NBR or FKM shaft seals. An outboard bearing is placed on the shaft end to handle radial and axial forces. The use of fine-meshed filters significantly increases the gear pump service life. Careful maintenance is
the prerequisite.